Nokia ISAM FGLT pon ports traffic

Is it possible to add custom oid to template to poll graphs for FGLT pon ports because by default only operational state works.
SNMP[’/usr/bin/snmpget’ ‘-v2c’ ‘-c’ ‘COMMUNITY’ ‘-OQUst’ ‘-m’ ‘EtherLike-MIB’ ‘-M’ ‘/opt/librenms/mibs:/opt/librenms/mibs/nokia:/opt/librenms/mibs/Array’ ‘udp:HOSTNAME:161’ ‘dot3StatsIndex.228655104’ ‘dot3StatsDuplexStatus.228655104’]

ifSpeed.228655104 = 1244000000
ifInOctets.228655104 = NULL
ifInUcastPkts.228655104 = NULL
ifInUnknownProtos.228655104 = NULL
ifOutOctets.228655104 = NULL
ifOutUcastPkts.228655104 = NULL
ifInErrors.228655104 = NULL
ifOutErrors.228655104 = NULL
ifInNUcastPkts.228655104 = NULL
ifOutNUcastPkts.228655104 = NULL
ifInDiscards.228655104 = NULL
ifOutDiscards.228655104 = NULL
ifPhysAddress.228655104 = NULL
ifLastChange.228655104 = 53778410
ifType.228655104 = gpon
ifMtu.228655104 = NULL

For ifInOctets and ifOutOctets I have the oid which polls these results but I want to know how to integrate them to template so they can poll automatically to the interfaces.

iso. = Hex-STRING: 00 00 00 00 0E 5E 31 FC
iso. = Hex-STRING: 00 00 00 00 00 01 43 CA

These are the OID which gives the traffic for last 5 mins, so with a simple hex convert rule and by dividing by 300s and multiple by 8 bits we can get the traffic in mb/s for these interfaces.

Since the result is in hex I can not add them by custom graphs so the only way I think is to add a rule on template which should address the poll to above oids.

Any help would be appreciated.

Hello, I’m also interested in this topic and also i would like to suggest this forum topic ISAM Ports - empty graphs
It might be helpful

I’m also working to get data from the different interfaces PON, ONT, etc…

Have you found something?

This topic was automatically closed 730 days after the last reply. New replies are no longer allowed.