I’d love to see a column for PoE in the switch port listing tab as well as the PoE Available/Used/Remaining wattage as is displayed in cisco land as show power inline
#show power inline
Module Available Used Remaining
(Watts) (Watts) (Watts)
1 370.0 138.6 231.4
Interface Admin Oper Power Device Class Max
(Watts)
Gi1/0/1 auto off 0.0 n/a n/a 30.0
Gi1/0/2 auto off 0.0 n/a n/a 30.0
Gi1/0/3 auto off 0.0 n/a n/a 30.0
Gi1/0/4 auto off 0.0 n/a n/a 30.0
Gi1/0/5 auto off 0.0 n/a n/a 30.0
Gi1/0/6 auto off 0.0 n/a n/a 30.0
Gi1/0/7 auto off 0.0 n/a n/a 30.0
Gi1/0/8 auto off 0.0 n/a n/a 30.0
Gi1/0/9 auto off 0.0 n/a n/a 30.0
Gi1/0/10 auto off 0.0 n/a n/a 30.0
Gi1/0/11 auto off 0.0 n/a n/a 30.0
Gi1/0/12 auto off 0.0 n/a n/a 30.0
Gi1/0/13 auto off 0.0 n/a n/a 30.0
Gi1/0/14 auto off 0.0 n/a n/a 30.0
Gi1/0/15 auto off 0.0 n/a n/a 30.0
Gi1/0/16 auto on 6.3 IP Phone 7960 n/a 30.0
Gi1/0/17 auto on 6.3 IP Phone 7960 n/a 30.0
Gi1/0/18 auto off 0.0 n/a n/a 30.0
Gi1/0/19 auto on 6.3 IP Phone 7960 n/a 30.0
Gi1/0/20 auto on 6.3 IP Phone 7960 n/a 30.0
Gi1/0/21 auto off 0.0 n/a n/a 30.0
Gi1/0/22 auto on 6.3 IP Phone 7961 2 30.0
Gi1/0/23 auto on 6.3 IP Phone 7960 n/a 30.0