Port-Channel / BE traffic Discrepancy

Hello

We have a few devices where the Port-Channel (or Bundle-Ether) virtual aggregation interfaces have traffic discrepancies to their respective physical Ten Gigs.

For example, over a 1 week view of the exact same timeframe:

Te1 = Max IN 5 Gbps
Te2 = Max IN 5 Gbps

Port-Channel1 (Te1/Te2) = Max IN 14 Gbps (+4 Gbps)

These devices can also sometimes exceed 5 minute polling time, can this also cause a traffic discrepancy problem like this?

Thanks

You probably need to set the interface speed under device settings.

Yes! all devices need to be pulled inside of a 300-second poll cycle otherwise you will have gaps and graph issues.

1 Like