Am I the only one who can not have the Dialer0 and Dialer1

[yac_w]

hello all,

i have this probleme i can’t have metrics for the interface Dialer0 and Dialer1 for routeur cisco

when i run the poller with the mode debuge
Port Di1: Dialer1 (16 / #8648) ifInOctets ifOutOctets ifInUcastPkts ifOutUcastPkts ifInBroadcastPkts ifOutBroadcastPkts ifInMulticastPkts ifOutMulticastPkts ifHighSpeed VLAN == Using ifDescr as ifAliasDialer1
ifInOctets (0 B) 0 Bps 30 secs
ifOutOctets (0 B) 0 Bps 30 secs
ifInErrors (0 B) 0 Bps 30 secs
ifOutErrors (0 B) 0 Bps 30 secs
ifInUcastPkts (0 B) 0 Bps 30 secs
ifOutUcastPkts (0 B) 0 Bps 30 secs
ifInNUcastPkts (0 B) 0 Bps 30 secs
ifOutNUcastPkts (0 B) 0 Bps 30 secs
ifInDiscards (0 B) 0 Bps 30 secs
ifOutDiscards (0 B) 0 Bps 30 secs
ifInUnknownProtos (0 B) 0 Bps 30 secs

i am the only who have this probleme in librenms

thank you,

[Kevin_Krumm]

Enable “selected port polling” for that device.