New Device: Pelco IP Security Cams

Hi Everyone,
I have lots of Pelco brand security cameras. NMS discovers as linux system. Can any one help to discover as Camera.

Best Regards

NMS discovered as

Nms polled as

manual snmpwalk

manual bulkwalk


Component Version
LibreNMS 22.5.0-12-g78583a4e7
DB Schema 2022_04_08_085504_isis_adjacencies_table_add_index (237)
PHP 7.4.3
Python 3.8.10
MySQL 10.3.34-MariaDB-0ubuntu0.20.04.1
RRDTool 1.7.2
SNMP 5.8


[OK] Composer Version: 2.3.5
[OK] Dependencies up-to-date.
[FAIL] APP_KEY does not match key used to encrypt data. APP_KEY must be the same on all nodes.
If you rotated APP_KEY, run lnms key:rotate to resolve.
[OK] Database connection successful
[OK] Database schema correct
[INFO] Detected Python Wrapper
[OK] Connection to memcached is ok

if you need, i found the MIB file of Pelco.

this section is missing from your walk/bulkwalk

enterprises 25066

without complete walk, it is low chance that someone will look at this

I agree, I noticed too. I think the manufacturer’s MIB File does not cover this product family.

Without MIB file, can anything be done?

Camera Model is Sarix Pro2.Model Number: IMP221-1IS.

Vendora MIB File description is like this.


SNMP Traps/MIBs the Sarix camera product lines utilize.

ALL Sarix model/series cameras to include the IM, ID, IDE, IE, IEE, IX, IM-E and IM-V model cameras plus NET5400 series products on similar versions of firmware.

The Sarix camera product lines utilize the following SNMP Traps/MIBs:

  • SNMPv2-MIB::system
  • RFC1213-MIB::interfaces
  • RFC1213-MIB::at
  • RFC1213-MIB::ip
  • RFC1213-MIB::icmp
  • RFC1213-MIB::tcp
  • RFC1213-MIB::udp
  • SNMPv2-MIB::snmp
  • SNMPv2-SMI::transmission
  • SNMPv2-SMI::mib-2.25.1
  • SNMPv2-SMI::mib-2.25.2

And there is a documentation

But My cams model starts with IMP, therefore MIB ia not belongs to this camera.

I tried with a new definition file with Regex catch but I couldnt succeded