Ubuiquiti (ubnt) switches not showing temperatures

Hi all,

I am very new to LibreNMS. I have some Unifi switches that were discovered by snmp scan and have noticed that they do not report temp values in librenms. It just shows “Low” with a yellow box around it like shown below. Thinking that I needed the latest MIBS, I downloaded them from ubnt and put them in /opt/librenms/mibs/ubnt then did another snmp-scan and ./discover.php. This did not help.

Can anyone provide some step by step help for a total newbie?

Thanks

As far as I know Unifi switches don’t provide the actual temperatures, just a generic description of he temperature.

@murrant After posting this, I ran a discovery on one of my switches and found what appears to be temps. So it does appear that they are being reported, however they they are not being shown in the UI.

Those reading corespond to the output of the switch:

temps2

So how can I get these to display in librenms???

It would be helpful if you posted all of the debug output instead of just a chopped off screenshot of it.

@murrant I was out of town and was not able to post the full output, but I did just get this fix and all is working now! Thank You!!

Andy

Nice!! Thanks @murrant!!

image